{"title":"Accessories \u0026 Hardware","description":null,"products":[{"product_id":"12-volt-plug","title":"12 Volt Plug","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMoisture proof sealing ring around the shaft to keep out spray and make it seat firmly in the outlet\u003c\/li\u003e\n\u003cli\u003e“ON” indicating LED\u003c\/li\u003e\n\u003cli\u003eStrain relief\u003c\/li\u003e\n\u003cli\u003eBuilt-in 10 Amp fuse\u003c\/li\u003e\n\u003cli\u003eDesigned to withstand the rigors of wet environments and constant vibration\u003c\/li\u003e\n\u003cli\u003eLarge contact surfaces for good electrical connection\u003c\/li\u003e\n\u003cli\u003eTwist lock system—plug locks securely into socket\u003c\/li\u003e\n\u003cli\u003eInternal strain relief and cord seal\u003c\/li\u003e\n\u003cli\u003eNickel plated copper alloy used for all current carrying components\u003c\/li\u003e\n\u003cli\u003eFront panel, rear panel, or surface mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/980012720.pdf?v=1789531152\" rel=\"noopener\" target=\"_blank\"\u003eInstructions\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52794684145951,"sku":"BS-1010","price":35.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/bs-1010-12v-plug.jpg?v=1789527561"},{"product_id":"small-format-labels","title":"Small Format Labels","description":"\u003cul\u003e\n\u003cli\u003e60 common DC labels.\u003c\/li\u003e\n\u003cli\u003eReinforced, weatherproof material\u003c\/li\u003e\n\u003cli\u003eUsed on all Contura Waterproof Circuit Breaker Panels\u003c\/li\u003e\n\u003cli\u003eUsed on Contura Waterproof Fuse Panels\u003c\/li\u003e\n\u003cli\u003eUsed on ST Blade Fuse Blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e60 common DC labels.\u003c\/li\u003e\n\u003cli\u003eReinforced, weatherproof material\u003c\/li\u003e\n\u003cli\u003eUsed on all Contura Waterproof Circuit Breaker Panels\u003c\/li\u003e\n\u003cli\u003eUsed on Contura Waterproof Fuse Panels\u003c\/li\u003e\n\u003cli\u003eUsed on ST Blade Fuse Blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBS-8214B\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e60 Labels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBS-8217B\u003c\/td\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003e60 Labels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/8214_Small_Format_Label_Kit.pdf?v=1789531551\" rel=\"noopener\" target=\"_blank\"\u003eSmall Format Label List\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794688536863,"sku":"BS-8214B, BS-8217B","price":24.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/BS-7870B.jpg?v=1789528199"},{"product_id":"nmea-2000-network-90-degree-elbow-connector","title":"NMEA 2000 Network 90 degree Elbow Connector","description":"\u003cp\u003eNMEA 2000 90 Degree Elbow Connector for connecting network cable in tight spaces.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eNMEA 2000 Network 90 degree Elbow Connector\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0046-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693222687,"sku":"CZ-80-911-0046-00","price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-90-Degree-Connector.jpg?v=1789527637"},{"product_id":"nmea-2000-network-female-banking-cap","title":"NMEA 2000 Network Female Banking Cap","description":"\u003cp\u003eCZONE NMEA 2000 Blanking Cap Female.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eNMEA 2000 Network Female Banking Cap\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0051-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693255455,"sku":"CZ-80-911-0051-00","price":6.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Blanking-Plug-Female.jpg?v=1789527637"},{"product_id":"nmea-2000-network-4-way-tee-connector","title":"NMEA 2000 Network 4 Way Tee Connector","description":"\u003cp\u003eConnects multiple devices into the NMEA backbone.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eConnects multiple devices into the NMEA backbone\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0048-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693288223,"sku":"CZ-80-911-0048-00","price":170.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-4way-Tee.jpg?v=1789527637"},{"product_id":"nmea-2000-6-5-ft-2m-network-extension-cable","title":"NMEA 2000 6.5 ft (2m) Network Extension Cable","description":"\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0027-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693320991,"sku":"CZ-80-911-0027-00","price":84.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Backbone-Cable_12b027d0-e65a-4b79-8f3f-885829bd2919.jpg?v=1789527614"},{"product_id":"nmea-2000-32-8ft-10m-network-extension-cable","title":"NMEA 2000 32.8ft (10m) Network Extension Cable","description":"\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0025-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693353759,"sku":"CZ-80-911-0025-00","price":84.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Backbone-Cable_b19cb331-f611-436d-bba2-7b78419e793e.jpg?v=1789527614"},{"product_id":"nmea-2000-network-single-tee-connector","title":"NMEA 2000 Network Single Tee Connector","description":"\u003cp\u003eConnects multiple devices into the NMEA backbone.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eNMEA 2000 Network Single Tee Connector\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0029-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693386527,"sku":"CZ-80-911-0029-00","price":59.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Single-Tee.jpg?v=1789527638"},{"product_id":"nmea-2000-network-2-way-tee-connector","title":"NMEA 2000 Network 2 Way Tee Connector","description":"\u003cp\u003eConnects multiple devices into the NMEA backbone.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eConnects multiple devices into the NMEA backbone\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0047-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693419295,"sku":"CZ-80-911-0047-00","price":120.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-2way-Tee.jpg?v=1789527637"},{"product_id":"nmea-2000-network-through-bulkhead-adapter","title":"NMEA 2000 Network Through Bulkhead Adapter","description":"\u003cp\u003eFor use on the backbone to transition through a waterproof bulkhead or can be used to connect removable equipment such as a computer interface.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eFor use on the backbone to transition through a waterproof bulkhead or can be used to connect removable equipment such as a computer interface\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0052-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693452063,"sku":"CZ-80-911-0052-00","price":27.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Thru-Bulkhead-Fitting.jpg?v=1789527638"},{"product_id":"nmea-2000-network-male-blanking-cap","title":"NMEA 2000 Network Male Blanking Cap","description":"\u003cp\u003eNMEA 2000 Network Male Blanking Cap.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eNMEA 2000 Network Male Blanking Cap\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0050-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693484831,"sku":"CZ-80-911-0050-00","price":6.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Male-Blanking-Plug.jpg?v=1789527638"},{"product_id":"nmea-2000-1-6-ft-0-5m-network-extension-cable","title":"NMEA 2000 1.6 ft (0.5m) Network Extension Cable","description":"\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0026-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693550367,"sku":"CZ-80-911-0026-00","price":44.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Backbone-Cable_96565efc-6109-4b86-aab0-e73d678ffd15.jpg?v=1789527614"},{"product_id":"nmea-2000-16-ft-5m-network-extension-cable","title":"NMEA 2000 16 ft (5m) Network Extension Cable","description":"\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0024-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693583135,"sku":"CZ-80-911-0024-00","price":84.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Backbone-Cable.jpg?v=1789527614"},{"product_id":"nmea-2000-network-female-terminating-resistor","title":"NMEA 2000 Network Female Terminating Resistor","description":"\u003cp\u003eUse at either end of the NMEA backbone to complete the network. Each network must have a male and female terminator.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eUse at either end of the NMEA backbone to complete the network. Each network must have a male and female terminator.\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0030-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693615903,"sku":"CZ-80-911-0030-00","price":22.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Female-Terminator.jpg?v=1789527638"},{"product_id":"nmea-2000-network-male-terminating-resistor","title":"NMEA 2000 Network Male Terminating Resistor","description":"\u003cp\u003eUse at either end of the NMEA backbone to complete the network. Each network must have a male and female terminator.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eUse at either end of the NMEA backbone to complete the network. Each network must have a male and female terminator.\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0031-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693648671,"sku":"CZ-80-911-0031-00","price":22.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Male-Terminator.jpg?v=1789527638"},{"product_id":"ancor-nmea2k-drop-cable-5mtrs","title":"Ancor NMEA2K Drop Cable 5mtrs","description":"\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eAncor NMEA2K Drop Cable 5mtrs\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0115-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693681439,"sku":"CZ-80-911-0115-00","price":78.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Drop-Cable_02c88407-957f-418f-a97b-70fa2d7a5e86.jpg?v=1789528217"},{"product_id":"ancor-nmea2k-drop-cable-0-5mtrs","title":"Ancor NMEA2K Drop Cable 0.5mtrs","description":"\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eAncor NMEA2K Drop Cable 0.5mtrs\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0116-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693714207,"sku":"CZ-80-911-0116-00","price":39.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Drop-Cable.jpg?v=1789528184"},{"product_id":"ancor-nmea2k-drop-cable-1mtr","title":"Ancor NMEA2K Drop Cable 1mtr","description":"\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eAncor NMEA2K Drop Cable 1mtr\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0117-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693746975,"sku":"CZ-80-911-0117-00","price":45.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Drop-Cable_9738d73f-c173-44c0-b402-7f56341e1b91.jpg?v=1789528184"},{"product_id":"ancor-nmea2k-drop-cable-2mtr","title":"Ancor NMEA2K Drop Cable 2mtr","description":"\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eAncor NMEA2K Drop Cable 2mtr\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0118-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693779743,"sku":"CZ-80-911-0118-00","price":54.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Drop-Cable_5d464fb2-e87f-4c9a-8967-db8bf3adff63.jpg?v=1789528217"},{"product_id":"czone-2-module-smart-harness","title":"CZone 2 Module Smart Harness","description":"\u003cp\u003eCZone utilises the industry standard NMEA2000 Network for its communication protocol. The new 2 Module Smart Harness replaces the need for a complete network backbone in a small system, meaning a robust, simpler and more cost-effective installation. The Smart Harness can also be fitted independent to any CZone installation where a small network comprising 2 devices is required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAll in one smart-harness for straight forward plug and play installation.\u003c\/li\u003e\n\u003cli\u003e2 Module Smart Harness connects one 6-button Waterpoof Keypad to the Contact 6 PLUS Module\u003c\/li\u003e\n\u003cli\u003eNot required when connecting to NMEA2000 Network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCZone utilizes the industry standard NMEA2000 Network for its communication protocol. The new 2 Module Smart Harness replaces the need for a complete network backbone in a small system, meaning a robust, simpler and more cost-effective installation. The Smart Harness can also be fitted independent to any CZone installation where a small network comprising 2 devices is required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAll in one smart-harness for straight forward plug and play installation.\u003c\/li\u003e\n\u003cli\u003e2 Module Smart Harness connects one 6-button Waterpoof Keypad to the Contact 6 PLUS Module\u003c\/li\u003e\n\u003cli\u003eNot required when connecting to NMEA2000 Network\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0171-00\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CZone-Smart-Harness-Data-Sheet.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003eCZone Smart Harness Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":52794693812511,"sku":"CZ-80-911-0171-00","price":120.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CZone-2way-Smart-Harness.jpg?v=1789528422"},{"product_id":"czone-3-module-smart-harness","title":"CZone 3 Module Smart Harness","description":"\u003cp\u003eCZone utilizes the industry standard NMEA2000 Network for its communication protocol. The new 3 Module Smart Harness replaces the need for a complete network backbone in a small system, meaning a robust, simpler and more cost-effective installation. The Smart Harness can also be fitted independent to any CZone installation where a small network comprising 3 devices is required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAll in one smart-harness for straight forward plug and play installation.\u003c\/li\u003e\n\u003cli\u003e3 Module Smart Harness connects two 6-button Waterpoof Keypads to the Contact 6 PLUS Module\u003c\/li\u003e\n\u003cli\u003eNot required when connecting to NMEA2000 Network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCZone utilizes the industry standard NMEA2000 Network for its communication protocol. The new 3 Module Smart Harness replaces the need for a complete network backbone in a small system, meaning a robust, simpler and more cost-effective installation. The Smart Harness can also be fitted independent to any CZone installation where a small network comprising 3 devices is required.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAll in one smart-harness for straight forward plug and play installation.\u003c\/li\u003e\n\u003cli\u003e3 Module Smart Harness connects two 6-button Waterpoof Keypad to the Contact 6 PLUS Module\u003c\/li\u003e\n\u003cli\u003eNot required when connecting to NMEA2000 Network\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0172-00\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CZone-Smart-Harness-Data-Sheet.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003eCZone Smart Harness Data Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":52794693845279,"sku":"CZ-80-911-0172-00","price":170.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-3way-Smart-Harness.jpg?v=1789528422"},{"product_id":"nmea-2000-3-2-ft-1m-network-power-cable","title":"NMEA 2000 3.2 ft (1m) Network Power Cable","description":"\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCarries power and data along backbone to NMEA 2000 devices\u003c\/p\u003e\u003cul\u003e\u003cli\u003ePN#CZ-80-911-0028-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794693976351,"sku":"CZ-80-911-0028-00","price":49.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/NMEA-Power-Cable.jpg?v=1789527614"},{"product_id":"oled-dc-amp-meter","title":"OLED DC Amp Meter","description":"\u003cp\u003eRound OLED DC Amp meter 0-100A DC IP66\u003c\/p\u003e\n\u003ch4\u003eAdditional information\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth\u003eMonitor\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003eAmps, Temperature, Voltage\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eEnerdrives OLED Voltmeter will monitor the voltage of your battery in real-time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003cli\u003eReal-time monitoring of voltage\u003c\/li\u003e\n\u003cli\u003eSimple installation\u003c\/li\u003e\n\u003cli\u003eMeasuring Range: 8-60V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40-85°C\u003c\/li\u003e\n\u003cli\u003eOLED Voltmeter\u003c\/li\u003e\n\u003cli\u003eIP66 Rated\u003c\/li\u003e\n\u003cli\u003eHigh quality, robust, compact\u003c\/li\u003e\n\u003cli\u003eOrange OLED display screen\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEnerdrives OLED Temperature meter can be used to measure essential equipment temperature. The meter will fit into common accessory sockets mounting holes for easy installation.\u003c\/p\u003e\u003cp\u003eThe Enerdrive OLED Amp Meter will give you accurate digital readings of your battery.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOLED digital display\u003c\/li\u003e\n\u003cli\u003eMeasures 0 – 100 Amp\u003c\/li\u003e\n\u003cli\u003e12V 24V Application\u003c\/li\u003e\n\u003cli\u003eSealing IP66 Rating\u003c\/li\u003e\n\u003cli\u003ePerfect for 4WD, Marine, Caravan\u003c\/li\u003e\n\u003cli\u003eComes with shunt 100A \/ 75mV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePart Listings \u0026amp; Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-OLED-AMP\u003c\/td\u003e\n\u003ctd\u003eRound OLED DC Amp Meter 0-100A DC IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-OLED-TEMP\u003c\/td\u003e\n\u003ctd\u003eRound OLED TEMP Monitor -40-120 DegC IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-OLED-VOLT\u003c\/td\u003e\n\u003ctd\u003eRound OLED DC Voltmeter 8-60V DC IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLD-AMP-Wiring.jpg?v=1789532230\"\u003eEA-OLED-AMP Wiring Diagram\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-AMP-dimensions.pdf?v=1789531522\" rel=\"noopener\" target=\"_blank\"\u003eEA-OLED-AMP Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-VOLT-dimensions.pdf?v=1789531537\" rel=\"noopener\" target=\"_blank\"\u003eEA-OLED-VOLT Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-TEMP-dimensions.pdf?v=1789531537\" rel=\"noopener\" target=\"_blank\"\u003eEA-OLED-TEMP Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794694205727,"sku":"EA-OLED-AMP","price":51.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-AMP.jpg?v=1789527639"},{"product_id":"panel-mount-50a-anderson-plug-holder","title":"Panel Mount 50A Anderson Plug Holder","description":"\u003cp\u003eEnerdrive | Dometic has designed a new range of 50A Anderson plug plates for simple installation. Choose from 3 different versions to suit your application. available with single or double socket holes for installing extra charge ports or adding a meter.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eEnerdrive | Dometic has designed a new range of 50A Anderson plug plates for simple installation. Choose from 3 different versions to suit your application. available with single or double socket holes for installing extra charge ports or adding a meter.\u003c\/p\u003e\n\u003ch3\u003ePart Listings \u0026amp; Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eDimension L x W x Dmm\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-APH-01\u003c\/td\u003e\n\u003ctd\u003ePanel Mount 50A Anderson Plug Holder\u003c\/td\u003e\n\u003ctd\u003e59.70 x 42.25 x 41mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-APH-02\u003c\/td\u003e\n\u003ctd\u003ePanel Mount 50A Anderson Plug Holder and 1 Socket Hole\u003c\/td\u003e\n\u003ctd\u003e59.70 x 75 x 41mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-APH-03\u003c\/td\u003e\n\u003ctd\u003ePanel Mount 50A Anderson Plug Holder and 2 Socket Holes\u003c\/td\u003e\n\u003ctd\u003e149 x 42 x 41mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794694238495,"sku":"EA-APH-01","price":15.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/16.jpg?v=1789528082"},{"product_id":"cms-230vac-plug-n-play-cms-150mm-lead","title":"CMS 230VAC Plug N Play - CMS-150MM-LEAD","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794699907359,"sku":"CMS-150MM-LEAD","price":20.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed.jpg?v=1789528306"},{"product_id":"cms-230vac-plug-n-play-cms-250mm-lead","title":"CMS 230VAC Plug N Play - CMS-250MM-LEAD","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794699940127,"sku":"CMS-250MM-LEAD","price":20.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_afdd9bc5-3749-4e20-8d9c-add394f93db9.jpg?v=1789528306"},{"product_id":"cms-230vac-plug-n-play-cms-500mm-lead","title":"CMS 230VAC Plug N Play - CMS-500MM-LEAD","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794699972895,"sku":"CMS-500MM-LEAD","price":20.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_99bc3bd1-63f5-40e8-81e9-2e8692f283f6.jpg?v=1789528307"},{"product_id":"cms-230vac-plug-n-play-cms-750mm-lead","title":"CMS 230VAC Plug N Play - CMS-750MM-LEAD","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700005663,"sku":"CMS-750MM-LEAD","price":23.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_b5bba95f-947c-49f5-ad6f-7d8f20cd84ff.jpg?v=1789528388"},{"product_id":"cms-230vac-plug-n-play-cms-1m-lead","title":"CMS 230VAC Plug N Play - CMS-1M-LEAD","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700038431,"sku":"CMS-1M-LEAD","price":26.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_5d17399c-7713-47ad-9b7e-93d14819ba49.jpg?v=1789528306"},{"product_id":"cms-230vac-plug-n-play-cms-2m-lead","title":"CMS 230VAC Plug N Play - CMS-2M-LEAD","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700071199,"sku":"CMS-2M-LEAD","price":31.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_7b437ca1-0186-4b5b-865e-0e094d3d2e29.jpg?v=1789528306"},{"product_id":"cms-230vac-plug-n-play-cms-2-5m-lead","title":"CMS 230VAC Plug N Play - CMS-2.5M-LEAD","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700103967,"sku":"CMS-2.5M-LEAD","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_470415d4-5707-4abb-a9b7-a6543044b756.jpg?v=1789528306"},{"product_id":"cms-230vac-plug-n-play-cms-3m-lead","title":"CMS 230VAC Plug N Play - CMS-3M-LEAD","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700136735,"sku":"CMS-3M-LEAD","price":38.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_11bb6bfb-31b0-4a10-b9a7-6ea2065c8e82.jpg?v=1789528307"},{"product_id":"cms-230vac-plug-n-play-cms-4m-lead","title":"CMS 230VAC Plug N Play - CMS-4M-LEAD","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700169503,"sku":"CMS-4M-LEAD","price":53.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_e28f587f-b941-455f-8c76-3ac656a2e26e.jpg?v=1789528308"},{"product_id":"cms-230vac-plug-n-play-cms-5m-lead","title":"CMS 230VAC Plug N Play - CMS-5M-LEAD","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700202271,"sku":"CMS-5M-LEAD","price":58.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_36d375fe-a1c5-431b-902d-3c5c19b79a0b.jpg?v=1789528387"},{"product_id":"cms-230vac-plug-n-play-cms-c16-2wt","title":"CMS 230VAC Plug N Play - CMS-C16.2WT","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700235039,"sku":"CMS-C16.2WT","price":44.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_35ec7e89-4315-4b6a-b6dd-19cf65ac3c76.jpg?v=1789528388"},{"product_id":"cms-230vac-plug-n-play-cms-c17-2bk","title":"CMS 230VAC Plug N Play - CMS-C17.2BK","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700267807,"sku":"CMS-C17.2BK","price":44.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_a694dfc0-11e5-4491-b965-a8f30b2f66a5.jpg?v=1789528388"},{"product_id":"cms-230vac-plug-n-play-cms-cmbwt-mod","title":"CMS 230VAC Plug N Play - CMS-CMBWT-MOD","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700300575,"sku":"CMS-CMBWT-MOD","price":8.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_cd9b5a20-715d-4352-afd9-380c53d54d1d.jpg?v=1789528389"},{"product_id":"cms-230vac-plug-n-play-cms-cil15bk","title":"CMS 230VAC Plug N Play - CMS-CIL15BK","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700333343,"sku":"CMS-CIL15BK","price":37.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_e5937cf9-a6c5-4752-96c2-5800e2f5a063.jpg?v=1789528388"},{"product_id":"cms-230vac-plug-n-play-cms-cil15wt","title":"CMS 230VAC Plug N Play - CMS-CIL15WT","description":"\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eCMS Electracom manufacture a range of DIY AC power points and cables that can be soft wired together. CMS products allow the DIY builder to fit many of the 230V cables and power points into the walls of a Motorhome, Caravan, Commercial Vehicle or 4WD Canopies during construction, and therefore limit the onsite time of a qualified electrician to the final inspection and testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cu\u003eHow it works\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard set-up would include the CMS Power Inlet that accepts 230V power into your RV via a 15amp extension lead. A CMS 16A Circuit Breaker that has a loom connection is then plugged into the Power Inlet then off to the first power point. A second loom connection cable then also connects to the rear of the first Power Point and heads off to the next Power Point. This continues around the RV.\u003c\/p\u003e\u003cp\u003eThe last power point in a line uses the inlet only and the outlet stays available for future use. You can also end the circuit with an external outlet for use outside under your awning. All power points include double pole switches to comply with Recreational Vehicle requirements. Lights and light switches are now almost always installed as 12V and can be installed safely by most DIY builders so are not included in the CMS range.\u003c\/p\u003e\u003cp\u003eYou can also place a double adapter into the loom, or at the junction of two cables. From here you can branch a new line off the original. This is ideal if you need a low and high power point on one wall, or you wish to start a new line on the other side of the RV or have a dedicated line strictly from the inlet for things like Battery Charger, Hot Water or Air Conditioning.\u003c\/p\u003e\u003cp\u003eAll CMS components we sell comply with Australian and NZ standards for installation in Recreational vehicles. AS\/NZ 3112, AS\/NZ 61535.1 Int):2001 AS\/NZ 3000:2000, 250V 50HZ 20amp \u0026amp; AS\/NZS 3001.2:2022. A maximum of 10 double or 12 single points can be included in a single circuit.\u003c\/p\u003e\u003cp\u003eAs mentioned above a 16amp circuit breaker or 16amp RCD must be included in each electrical circuit. These components are now used by a number of Australia RV manufacturers due to their ease of use.\u003c\/p\u003e\u003cp\u003eIn designing your cable requirements and installation be mindful that each cable has sealed ends that measures 25mm x 16mm. So if it cannot be installed before sheeting, it must be able to be fitted through frame members. All cables have a female and male end to prevent errors in connecting the cables.\u003c\/p\u003e\u003cp\u003eAll fittings have a security clip so once connected they require manual manipulation to separate. Each Power Point requires a recess depth of 32mm. Mounting blocks are available where the Power Point cannot be recessed as described. The cables have an outer sheath and when placed within walls should allow extra length for removal of the Power Point in case replacement is required.\u003c\/p\u003e\u003cp\u003eIf you are looking for a system, contact Enerdrive to discuss your requirements and allow us to create the best and simplest setup for your application.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eCMS Electrocom\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart No\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-150MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e150mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-250MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e250mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-500MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e500mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-750MM-LEAD\u003c\/td\u003e\n\u003ctd\u003e750mm Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-1M-LEAD\u003c\/td\u003e\n\u003ctd\u003e1.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-2.5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e2.5m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-3M-LEAD\u003c\/td\u003e\n\u003ctd\u003e3.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-4M-LEAD\u003c\/td\u003e\n\u003ctd\u003e4.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-5M-LEAD\u003c\/td\u003e\n\u003ctd\u003e5.0m Connection Lead \"C\" Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Points \u0026amp; Inlets\/Outlets\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C16.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C17.2WT\u003c\/td\u003e\n\u003ctd\u003e'C' Type Double GPO - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CMBWT-MOD\u003c\/td\u003e\n\u003ctd\u003eMounting Spacer to suit 'C' Type GPO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CIL15WT\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10BK\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-COL10WT\u003c\/td\u003e\n\u003ctd\u003e10A AC Power External Outlet - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRCD Safety Switches \u0026amp; Splitters\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-BK\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCBO-INLET-WH\u003c\/td\u003e\n\u003ctd\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44 - White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-CCBNW-A\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc Earth Lead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-RCD-C3.1\u003c\/td\u003e\n\u003ctd\u003e\"C\" Style to \"C\" Style RCD 16A inc M.E.N (Inverter Out)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3DWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 2 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCMS-C3EWT\u003c\/td\u003e\n\u003ctd\u003eAC Splitter 1 In \/ 3 Out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CIL-CB.pdf?v=1789531334\" rel=\"noopener\" target=\"_blank\"\u003e15A AC Power External Inlet \u0026amp; 16A RCD IP44\/56 Installation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794700366111,"sku":"CMS-CIL15WT","price":37.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CMS-230VAC-Plug-N-Play_2_Compressed_07d1c57c-567b-49b1-85f1-5caedd487f7c.jpg?v=1789528389"},{"product_id":"czone-cable-assembly-for-sci-incl-rj45-carling-0-5-metre","title":"CZone Cable Assembly for SCI Incl RJ45 Carling - 0.5 metre","description":"\u003ch4\u003eAdditional information\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e0.5 metre, 3.0 metre\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003e0.5 and 3.0 metre Cable Assembly CZone SCI Incl RJ45 Carling.\u003c\/p\u003e\u003cp\u003eOther lengths available (0.5, 1.0, 2.0, 3.0, 4.0, 5.0m)\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSKU: CZ-80-911-0018-00, CZ-80-911-0021-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":52794702725407,"sku":"CZ-80-911-0018-00","price":11.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CZone-SCI-Contura-Cable.jpg?v=1789528422"},{"product_id":"czone-cable-assembly-for-sci-incl-rj45-carling-3-0-metre","title":"CZone Cable Assembly for SCI Incl RJ45 Carling - 3.0 metre","description":"\u003ch4\u003eAdditional information\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003e0.5 metre, 3.0 metre\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003e0.5 and 3.0 metre Cable Assembly CZone SCI Incl RJ45 Carling.\u003c\/p\u003e\u003cp\u003eOther lengths available (0.5, 1.0, 2.0, 3.0, 4.0, 5.0m)\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSKU: CZ-80-911-0018-00, CZ-80-911-0021-00\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":52794702790943,"sku":"CZ-80-911-0021-00","price":18.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CZone-SCI-Contura-Cable_6bff4ca4-292e-4bc7-9779-21823417a95a.jpg?v=1789528423"},{"product_id":"czone-sci-cable-rj45-pb-switch-cz-80-911-0087-01","title":"CZone SCI Cable RJ45\/PB Switch - CZ-80-911-0087-01","description":"\u003cp\u003eSCI Cable to suit Push Buttons.\u003c\/p\u003e\n\u003ch4\u003eAdditional information\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003eCZ-80-911-0087-01, CZ-80-911-0088-01, CZ-80-911-0089-01\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cstrong\u003ePush Button Cable Assembly\u003c\/strong\u003e\u003cbr\u003e\nSuitable for Switch Control Interface (SCI) and Digital Switch Breakout (DSB) compatible with push buttons. Suits CZones 3.3v Push Button LED Switches.\u003cp\u003eLengths available (0.5, 1.0, 2.0, 5.0 \u0026amp; 8.0m)\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePN#CZ-80-911-0085-01 0.5M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0086-01 1.0M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0087-01 2.0M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0088-01 5.0M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0089-01 8.0M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":52794705510687,"sku":"CZ-80-911-0087-01","price":25.6,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CZone-SCI-Cable.jpg?v=1789527560"},{"product_id":"czone-sci-cable-rj45-pb-switch-cz-80-911-0088-01","title":"CZone SCI Cable RJ45\/PB Switch - CZ-80-911-0088-01","description":"\u003cp\u003eSCI Cable to suit Push Buttons.\u003c\/p\u003e\n\u003ch4\u003eAdditional information\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003eCZ-80-911-0087-01, CZ-80-911-0088-01, CZ-80-911-0089-01\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cstrong\u003ePush Button Cable Assembly\u003c\/strong\u003e\u003cbr\u003e\nSuitable for Switch Control Interface (SCI) and Digital Switch Breakout (DSB) compatible with push buttons. Suits CZones 3.3v Push Button LED Switches.\u003cp\u003eLengths available (0.5, 1.0, 2.0, 5.0 \u0026amp; 8.0m)\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePN#CZ-80-911-0085-01 0.5M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0086-01 1.0M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0087-01 2.0M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0088-01 5.0M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0089-01 8.0M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":52794705543455,"sku":"CZ-80-911-0088-01","price":36.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CZone-SCI-Cable_8ddb7c55-ec89-41d4-84fe-56c0d4f8a1d8.jpg?v=1789527560"},{"product_id":"czone-sci-cable-rj45-pb-switch-cz-80-911-0089-01","title":"CZone SCI Cable RJ45\/PB Switch - CZ-80-911-0089-01","description":"\u003cp\u003eSCI Cable to suit Push Buttons.\u003c\/p\u003e\n\u003ch4\u003eAdditional information\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003eCZ-80-911-0087-01, CZ-80-911-0088-01, CZ-80-911-0089-01\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cstrong\u003ePush Button Cable Assembly\u003c\/strong\u003e\u003cbr\u003e\nSuitable for Switch Control Interface (SCI) and Digital Switch Breakout (DSB) compatible with push buttons. Suits CZones 3.3v Push Button LED Switches.\u003cp\u003eLengths available (0.5, 1.0, 2.0, 5.0 \u0026amp; 8.0m)\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePN#CZ-80-911-0085-01 0.5M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0086-01 1.0M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0087-01 2.0M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0088-01 5.0M\u003c\/li\u003e\n\u003cli\u003ePN#CZ-80-911-0089-01 8.0M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"http:\/\/www.delzer.com\/powerproducts\/czn_cat_003\/\"\u003eCZone Catalogue\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":52794705576223,"sku":"CZ-80-911-0089-01","price":46.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/CZone-SCI-Cable_f9a92472-ab03-49b6-97cc-85c937d02f99.jpg?v=1789527560"},{"product_id":"oled-temperature-meter","title":"OLED Temperature Meter","description":"\u003cp\u003eRound OLED TEMP Monitor -40 to 120 Degrees Celsius IP66\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eEnerdrives OLED Voltmeter will monitor the voltage of your battery in real-time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003cli\u003eReal-time monitoring of voltage\u003c\/li\u003e\n\u003cli\u003eSimple installation\u003c\/li\u003e\n\u003cli\u003eMeasuring Range: 8-60V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40-85°C\u003c\/li\u003e\n\u003cli\u003eOLED Voltmeter\u003c\/li\u003e\n\u003cli\u003eIP66 Rated\u003c\/li\u003e\n\u003cli\u003eHigh quality, robust, compact\u003c\/li\u003e\n\u003cli\u003eOrange OLED display screen\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEnerdrives OLED Temperature meter can be used to measure essential equipment temperature. The meter will fit into common accessory sockets mounting holes for easy installation.\u003c\/p\u003e\u003cp\u003eThe Enerdrive OLED Amp Meter will give you accurate digital readings of your battery.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOLED digital display\u003c\/li\u003e\n\u003cli\u003eMeasures 0 – 100 Amp\u003c\/li\u003e\n\u003cli\u003e12V 24V Application\u003c\/li\u003e\n\u003cli\u003eSealing IP66 Rating\u003c\/li\u003e\n\u003cli\u003ePerfect for 4WD, Marine, Caravan\u003c\/li\u003e\n\u003cli\u003eComes with shunt 100A \/ 75mV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePart Listings \u0026amp; Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-OLED-AMP\u003c\/td\u003e\n\u003ctd\u003eRound OLED DC Amp Meter 0-100A DC IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-OLED-TEMP\u003c\/td\u003e\n\u003ctd\u003eRound OLED TEMP Monitor -40-120 DegC IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-OLED-VOLT\u003c\/td\u003e\n\u003ctd\u003eRound OLED DC Voltmeter 8-60V DC IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLD-AMP-Wiring.jpg?v=1789532230\"\u003eEA-OLED-AMP Wiring Diagram\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-AMP-dimensions.pdf?v=1789531522\" rel=\"noopener\" target=\"_blank\"\u003eEA-OLED-AMP Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-VOLT-dimensions.pdf?v=1789531537\" rel=\"noopener\" target=\"_blank\"\u003eEA-OLED-VOLT Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-TEMP-dimensions.pdf?v=1789531537\" rel=\"noopener\" target=\"_blank\"\u003eEA-OLED-TEMP Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794705805599,"sku":"EA-OLED-TEMP","price":48.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-TEMP.jpg?v=1789527639"},{"product_id":"oled-dc-volt-meter","title":"OLED DC Volt Meter","description":"\u003cp\u003eRound OLED DC Volt Meter 8-60V DC IP66\u003c\/p\u003e\n\u003ch4\u003eAdditional information\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth\u003eMonitor\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003eAmps, Temperature, Voltage\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eEnerdrives OLED Voltmeter will monitor the voltage of your battery in real-time.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003cli\u003eReal-time monitoring of voltage\u003c\/li\u003e\n\u003cli\u003eSimple installation\u003c\/li\u003e\n\u003cli\u003eMeasuring Range: 8-60V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40-85°C\u003c\/li\u003e\n\u003cli\u003eOLED Voltmeter\u003c\/li\u003e\n\u003cli\u003eIP66 Rated\u003c\/li\u003e\n\u003cli\u003eHigh quality, robust, compact\u003c\/li\u003e\n\u003cli\u003eOrange OLED display screen\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEnerdrives OLED Temperature meter can be used to measure essential equipment temperature. The meter will fit into common accessory sockets mounting holes for easy installation.\u003c\/p\u003e\u003cp\u003eThe Enerdrive OLED Amp Meter will give you accurate digital readings of your battery.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOLED digital display\u003c\/li\u003e\n\u003cli\u003eMeasures 0 – 100 Amp\u003c\/li\u003e\n\u003cli\u003e12V 24V Application\u003c\/li\u003e\n\u003cli\u003eSealing IP66 Rating\u003c\/li\u003e\n\u003cli\u003ePerfect for 4WD, Marine, Caravan\u003c\/li\u003e\n\u003cli\u003eComes with shunt 100A \/ 75mV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePart Listings \u0026amp; Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart #\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-OLED-AMP\u003c\/td\u003e\n\u003ctd\u003eRound OLED DC Amp Meter 0-100A DC IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-OLED-TEMP\u003c\/td\u003e\n\u003ctd\u003eRound OLED TEMP Monitor -40-120 DegC IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-OLED-VOLT\u003c\/td\u003e\n\u003ctd\u003eRound OLED DC Voltmeter 8-60V DC IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLD-AMP-Wiring.jpg?v=1789532230\"\u003eEA-OLED-AMP Wiring Diagram\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-AMP-dimensions.pdf?v=1789531522\" rel=\"noopener\" target=\"_blank\"\u003eEA-OLED-AMP Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-VOLT-dimensions.pdf?v=1789531537\" rel=\"noopener\" target=\"_blank\"\u003eEA-OLED-VOLT Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-TEMP-dimensions.pdf?v=1789531537\" rel=\"noopener\" target=\"_blank\"\u003eEA-OLED-TEMP Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794705838367,"sku":"EA-OLED-VOLT","price":41.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-OLED-VOLT-METER.jpg?v=1789527639"},{"product_id":"usb-a-qc-3-0-36w-usb-c-pd-60w-socket-max-100w","title":"USB-A QC 3.0 36W \u0026 USB-C PD 60W Socket (Max 100W)","description":"\u003cp\u003eInput: 12-24VDC, PE A \u0026amp; C Simultaneously (36W+60W), PE A (3.6V-12V MAX:36W) TYPE C (5V-20V MAX 100W)\u003c\/p\u003e\n\u003ch4\u003eAdditional information\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eEnerdrive | Dometic are now stocking its own range of Plugs, Sockets, USBs \u0026amp; Mounts. Available in attractive packaging for Retail shops and include all wiring\/mounting instructions.\u003c\/p\u003e\n\u003ch3\u003ePart Listings \u0026amp; Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-DCS-01\u003c\/td\u003e\n\u003ctd\u003eRound DC 12v Cigarette Socket 20A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-ENGEL-PLUG\u003c\/td\u003e\n\u003ctd\u003eEngel Style Plug\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-ENGEL-SOCKET\u003c\/td\u003e\n\u003ctd\u003eEngel Style Socket\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MERIT\u003c\/td\u003e\n\u003ctd\u003eMerit Style Socket\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MERIT-PLUG\u003c\/td\u003e\n\u003ctd\u003eMerit Style Plug\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MOUNT-01\u003c\/td\u003e\n\u003ctd\u003eSurface Mount 1 x Socket Housing\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MOUNT-02\u003c\/td\u003e\n\u003ctd\u003eSurface Mount 2 x Socket Housing\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-01\u003c\/td\u003e\n\u003ctd\u003eSwitch Style USB 4.8A - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-02\u003c\/td\u003e\n\u003ctd\u003eRound USB 4.8A with Waterproof Cover - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-03\u003c\/td\u003e\n\u003ctd\u003eRound USB 4.8A Open Face - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-05\u003c\/td\u003e\n\u003ctd\u003eRound USB-A \u0026amp; USB-C Open Face - GREEN LED\u003c\/td\u003e\n\u003ctd\u003eInput: 12-24VDC, PE A \u0026amp; C Simultaneously (36W+60W), PE A (3.6V-12V MAX:36W) TYPE C (5V-20V MAX 100W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794705871135,"sku":"EA-USB-05","price":68.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-USB-05.1682.jpg?v=1789528327"},{"product_id":"dual-usb-a-4-8a-socket","title":"Dual USB-A 4.8A Socket","description":"\u003cp\u003e• Dual USB Socket with Max. 2.4A Current per Output\u003cbr\u003e\n• Suitable for 12 or 24V Battery Banks\u003c\/p\u003e\n\u003ch4\u003eAdditional information\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eEnerdrive | Dometic are now stocking its own range of Plugs, Sockets, USBs \u0026amp; Mounts. Available in attractive packaging for Retail shops and include all wiring\/mounting instructions.\u003c\/p\u003e\n\u003ch3\u003ePart Listings \u0026amp; Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-DCS-01\u003c\/td\u003e\n\u003ctd\u003eRound DC 12v Cigarette Socket 20A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-ENGEL-PLUG\u003c\/td\u003e\n\u003ctd\u003eEngel Style Plug\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-ENGEL-SOCKET\u003c\/td\u003e\n\u003ctd\u003eEngel Style Socket\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MERIT\u003c\/td\u003e\n\u003ctd\u003eMerit Style Socket\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MERIT-PLUG\u003c\/td\u003e\n\u003ctd\u003eMerit Style Plug\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MOUNT-01\u003c\/td\u003e\n\u003ctd\u003eSurface Mount 1 x Socket Housing\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MOUNT-02\u003c\/td\u003e\n\u003ctd\u003eSurface Mount 2 x Socket Housing\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-01\u003c\/td\u003e\n\u003ctd\u003eSwitch Style USB 4.8A - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-02\u003c\/td\u003e\n\u003ctd\u003eRound USB 4.8A with Waterproof Cover - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-03\u003c\/td\u003e\n\u003ctd\u003eRound USB 4.8A Open Face - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-05\u003c\/td\u003e\n\u003ctd\u003eRound USB-A \u0026amp; USB-C Open Face - GREEN LED\u003c\/td\u003e\n\u003ctd\u003eInput: 12-24VDC, PE A \u0026amp; C Simultaneously (36W+60W), PE A (3.6V-12V MAX:36W) TYPE C (5V-20V MAX 100W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794705903903,"sku":"EA-USB-03","price":26.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-USB-03.jpg?v=1789527636"},{"product_id":"dual-usb-a-4-8a-socket-with-cover","title":"Dual USB-A 4.8A Socket with Cover","description":"\u003cp\u003e• Dual USB Socket with Max. 2.4A Current per Output\u003cbr\u003e\n• Suitable for 12 or 24V Battery Banks\u003cbr\u003e\n• Includes Rubber Dust Cover\u003c\/p\u003e\n\u003ch4\u003eAdditional information\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003eEA-DCS-01, EA-ENGEL-PLUG, EA-ENGEL-SOCKET, EA-MERIT, EA-MERIT-PLUG, EA-MOUNT-01, EA-MOUNT-02, EA-USB-01, EA-USB-02, EA-USB-03, EA-USB-05\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eEnerdrive | Dometic are now stocking its own range of Plugs, Sockets, USBs \u0026amp; Mounts. Available in attractive packaging for Retail shops and include all wiring\/mounting instructions.\u003c\/p\u003e\n\u003ch3\u003ePart Listings \u0026amp; Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-DCS-01\u003c\/td\u003e\n\u003ctd\u003eRound DC 12v Cigarette Socket 20A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-ENGEL-PLUG\u003c\/td\u003e\n\u003ctd\u003eEngel Style Plug\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-ENGEL-SOCKET\u003c\/td\u003e\n\u003ctd\u003eEngel Style Socket\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MERIT\u003c\/td\u003e\n\u003ctd\u003eMerit Style Socket\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MERIT-PLUG\u003c\/td\u003e\n\u003ctd\u003eMerit Style Plug\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MOUNT-01\u003c\/td\u003e\n\u003ctd\u003eSurface Mount 1 x Socket Housing\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MOUNT-02\u003c\/td\u003e\n\u003ctd\u003eSurface Mount 2 x Socket Housing\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-01\u003c\/td\u003e\n\u003ctd\u003eSwitch Style USB 4.8A - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-02\u003c\/td\u003e\n\u003ctd\u003eRound USB 4.8A with Waterproof Cover - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-03\u003c\/td\u003e\n\u003ctd\u003eRound USB 4.8A Open Face - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-05\u003c\/td\u003e\n\u003ctd\u003eRound USB-A \u0026amp; USB-C Open Face - GREEN LED\u003c\/td\u003e\n\u003ctd\u003eInput: 12-24VDC, PE A \u0026amp; C Simultaneously (36W+60W), PE A (3.6V-12V MAX:36W) TYPE C (5V-20V MAX 100W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794705936671,"sku":"EA-USB-02","price":26.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-USB-02.jpg?v=1789527637"},{"product_id":"rocker-switch-dual-usb-a-4-8a","title":"Rocker Switch Dual USB-A 4.8A","description":"\u003cul\u003e\n\u003cli\u003eRocker Switch Type\u003c\/li\u003e\n\u003cli\u003eDual USB Socket with Max. 2.4A Current per Output\u003c\/li\u003e\n\u003cli\u003eSuitable for 12 or 24V Battery Banks\u003c\/li\u003e\n\u003cli\u003eIncludes Rubber Dust Cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdditional information\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003e\u003cp\u003eEA-DCS-01, EA-ENGEL-PLUG, EA-ENGEL-SOCKET, EA-MERIT, EA-MERIT-PLUG, EA-MOUNT-01, EA-MOUNT-02, EA-USB-01, EA-USB-02, EA-USB-03, EA-USB-05\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cp\u003eEnerdrive | Dometic are now stocking its own range of Plugs, Sockets, USBs \u0026amp; Mounts. Available in attractive packaging for Retail shops and include all wiring\/mounting instructions.\u003c\/p\u003e\n\u003ch3\u003ePart Listings \u0026amp; Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eDescription\u003c\/th\u003e\n\u003cth\u003eSpecifications\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-DCS-01\u003c\/td\u003e\n\u003ctd\u003eRound DC 12v Cigarette Socket 20A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-ENGEL-PLUG\u003c\/td\u003e\n\u003ctd\u003eEngel Style Plug\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-ENGEL-SOCKET\u003c\/td\u003e\n\u003ctd\u003eEngel Style Socket\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MERIT\u003c\/td\u003e\n\u003ctd\u003eMerit Style Socket\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MERIT-PLUG\u003c\/td\u003e\n\u003ctd\u003eMerit Style Plug\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MOUNT-01\u003c\/td\u003e\n\u003ctd\u003eSurface Mount 1 x Socket Housing\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-MOUNT-02\u003c\/td\u003e\n\u003ctd\u003eSurface Mount 2 x Socket Housing\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-01\u003c\/td\u003e\n\u003ctd\u003eSwitch Style USB 4.8A - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-02\u003c\/td\u003e\n\u003ctd\u003eRound USB 4.8A with Waterproof Cover - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-03\u003c\/td\u003e\n\u003ctd\u003eRound USB 4.8A Open Face - GREEN LED\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEA-USB-05\u003c\/td\u003e\n\u003ctd\u003eRound USB-A \u0026amp; USB-C Open Face - GREEN LED\u003c\/td\u003e\n\u003ctd\u003eInput: 12-24VDC, PE A \u0026amp; C Simultaneously (36W+60W), PE A (3.6V-12V MAX:36W) TYPE C (5V-20V MAX 100W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52794705969439,"sku":"EA-USB-01","price":26.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/files\/EA-USB-01.jpg?v=1789528120"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/8237\/2639\/collections\/2_5bbabfe9-9049-4124-b395-8e1e3341ea0c.png?v=1790337092","url":"https:\/\/www.enerdrive.com.au\/collections\/accessories-hardware.oembed","provider":"Dometic Mobile Power APAC","version":"1.0","type":"link"}