ML-RBS Remote Battery Switch with Manual Control – 12V DC 500A

BS-7700

500 Amp magnetic latching switch provides high amperage switching under load, manually or from remote locations.

ML-RBS Remote Battery Switch with Manual Control – 12V DC 500A

  • Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing
  • LED output to remotely indicate switch state – requires optional LED
  • 3∕ 8″-16 tin-plated copper studs for maximum conductivity and corrosion resistance
  • 7∕ 8″ (22 mm) stud length accepts multiple cable terminals
  • Label recesses for circuit identification
  • Silver alloy contacts provide high reliability for switching live loads
ML-RBS Remote Battery Switch with Manual Control – 12V DC 500A
Note: Specifications subject to change without notice.
Control Circuit Connection Tinned Wire
Nominal Voltage 12V DC
Manual Control Yes
Coil Function Bi-Stable
Mounting #10
Amperage Operating Current 0mA
Amperage Operating Current when changing state <7A (40ms)
Terminal Stud Torque 140 in-lb (15.82 Nm)
Control Circuit Voltage 10.1 to 16.5V DC
Continuous Rating 500A
Intermittent Rating 700A (5 min)
Cranking Rating 10 sec 2500A
Cranking Rating 1 min 1100A
Minimum Operating Temperature -10° C
Maximum Operating Temperature 50° C
Cable Size to Meet Ratings 2x (4/0)
Live Current Switching 300A @ 12V DC
Master Control Switch Capability No
Mechanical Endurance 100,000 Cycles
Terminal Ring Diameter Clearance 1.18in (29.97 mm)
Terminal Stud Length 0.875in (22.23 mm)
Terminal Stud Size 3/8″ – 16 (M10)
Weight 0.79 kg

You will require the Adobe® Reader® software installed on your computer to view these files. You can download the reader by clicking on the link below.

Adobe® Reader® software is the free global standard for reliably viewing, printing, and commenting on PDF documents.

Get Adobe Reader

Shares
Share This