EcoBoost MPPT Solar Controller – Metered

he NEW EcoBoost MPPT™ is a Maximum Power Point Tracking (MPPT) solar charge controller within Morningstar’s Essential Series™.  This controller was developed for residential and leisure consumer applications where an MPPT controller is desired to provide additional power and accommodations for modules that are not supported by other types of controllers.  Metered and non-metered versions of this product are available at 20, 30, and 40 amp charge ratings for 12 and 24 volt battery systems.

The NEW EcoBoost MPPT™ is a Maximum Power Point Tracking (MPPT) solar charge controller within Morningstar’s Essential Series™.  This controller was developed for residential and leisure consumer applications where an MPPT controller is desired to provide additional power and accommodations for modules that are not supported by other types of controllers.  Metered and non-metered versions of this product are available at 20, 30, and 40 amp charge ratings for 12 and 24 volt battery systems.

  • Two USB-A ports for charging multiple mobile phones/tablets
  •  3 Amps of USB charging capacity
  • Metered and non-metered versions
  • Four stage battery charging
  • Dusk ‘til dawn lighting control
  • Load control
  • Electronic and environmental protections
  • Wide operating temperature range
EcoBoost™ Solar Charge Controller
SR-EB-20M SR-EB-30M SR-EB-40M
Electrical
Nominal Battery Voltage 12V or 24V auto-detect
Battery Voltage Range 10-35V
Voltage Accuracy <= 0.1% +/- 50mV
Maximum Battery Current 10A, 20A or 30A
Maximum PV open-circuit voltage 120V
Load Current Rating 10A, 20A or 30A
Self-Consumption <1.2 Watts
LED Indications (1) status, (3) Battery state of charge
Transient Surge Protection 1500 Watts (solar, battery, load)
Environmental
Operating Temperature -40°C to + 60°C
Storage Temperature -40°C to + 80°C
Humidity 100% non-condensing
Tropicalization conformal coating, marine-rated terminals
Mechanical
Dimensions (W x L x D) 196 x 173 x 71 cm

 

Weight 1.4 kg
Wire Size Range Power Terminals: 2.5 – 16 mm2 / 14 – 6 AWG

Battery/Temp. Sense: 0.25 – 1.0 mm2 / 24 – 16 AWG

Enclosure IP20, Type 1
Electronic Protections
Solar Input overload, short-circuit, high voltage, reverse polarity, high temperature, nighttime reverse current
Load Output overload, short-circuit, high temperature, reverse polarity
Battery reverse polarity (no battery removal)
Battery Charging
4-Stage charging Bulk, Absorption, Float, Equalize
Temperature Compensation Coefficient -30mV/°C/12volt
Set-points Absorption, Float, Equalize, HVD
Load & Lighting Control
Low Voltage Disconnect, Low Voltage Reconnect Settings 11.4 V / 12.6 V or Custom (x2 for 24 volt systems)
Lighting Settings Dusk to Dawn
Certifications
CE, TUV Listed IEC 62109
Meter
Resolution 128 x 64 pixels
Viewing Area 50 mm x 25 mm
Interactive Yes
Note: Specifications subject to change without notice.
Description
Remote Temperature Sensor (RTS)
Note: Specifications subject to change without notice
You will require the Adobe® Reader® software installed on your computer to view these files. You can download the reader by clicking on the link below.

Adobe® Reader® software is the free global standard for reliably viewing, printing, and commenting on PDF documents.

Get Adobe Reader

Shares
Share This