100Ah Slim Lithium Battery 12V

EPL-100AH-12V-BATT

All lithium Ion batteries require a battery management system (BMS).

100Ah Slim Lithium Battery Dimensions

Dimensions

Lithium Battery front view

Front

End

Top

Lithium Ion batteries have a high energy density and are perfect for cyclic applications. They offer savings of up to 70% in volume and weight compared to traditional lead-acid batteries. Lithium Ion batteries offer ultra-fast charging and discharging, high efficiency and three times as many charging cycles (>1500 full cycles) compared to traditional lead acid batteries.

Enerdrive’s Lithium-iron-phosphate (LiFePO4) is the safest of the mainstream li-ion battery types. The nominal voltage of each cell is 3,2V. A 12,8V Enerdrive battery therefore consists of 4 cells connected in series.

All lithium Ion batteries require a battery management system (BMS). There is no way around this. There are numerous examples of catastrophic failures where no BMS has been used.

The Enerdrive Lithium battery packs incorporate Active Cell Balancing across the range. The balancing method used is Dynamic Energy Transfer. This allows for automatic balancing of the cells during charging, discharging and storage. Any cells with high voltage density will transfer energy to the lower cells in the pack. This method of cell balancing utilises the energy within the battery pack to balance the cells unlike passive balancing systems which bleed this excess energy off as heat to keep the battery balanced at the top end of the charging cycle, wasting energy already stored within the battery.

The Enerdrive Active Balancing System also incorporates individual cell “Hi -Voltage & Low-Voltage” disconnect feature to interface with the Enerdrive Advanced BMS Driver, switching (off/on) of charging sources & consumer loads. Running Active Cell Balancing allows Enerdrive to parallel and series connect multiple batteries within the system. This offers 12v, 24v, 36v &,48v systems with up to the possibillity of 1500Ah+ capacity.

The installation kit incorporates the Enerdrive Advanced BMS Rely Driver, ePRO PLUS monitor, Main DC Fuse and a load disconnect latching relay. This kit is connected to the battery and designed to work hand in hand with the batteries Active Balancing System for controlling charging and discharging sources for ultimate protection of your investment.

Many companies will just sell you the battery and if lucky, you will get a BMS incorporated. They neglect to tell you that disconnecting loads and charging sources at the critical times requires more equipment to be installed to manage these operations.

 

EPL-100AH-12V-BATT
Model EPL-100AH-12V-BATT
Nominal Capacity 100Ah 1280Wh
Nominal Voltage 12.8V
Life Cycles* 80% DOD ≥2000 Cycles
Self-discharge Rate ≤3%
Weight 19kg Approx.
Dimensions L x W x H 411 x 135 x 268mm (Download PDF)
Charge Discharge
Mode: CC & CV
Max & Min Voltage: 15V 11.5V
Standard Current 0.3C,33A 0.3C,33A
Max Constant Current 2C,200A 3C,300A
Operating Temperature 0°C-+45°C -20°C-+60°C
Max Charge Voltage 14.20V
Float Voltage 13.50V
Note: Specifications subject to change without notice.

 

Active Cell Balancing & Protection Info
Balancer Type Active
Balancing Method Dynamic Energy Transfer
Battery Capacity Limited 50Ah-1000Ah LifePo4 Lithium Battery
Working Voltage Range 2.0v – 4.2v
Low – High Cell Voltage Protection 2.8v – 3.8v
Battery Cell Count Limit 2 – unlimited
Power Consumption <50mW (<0.004A)
Acceptable Constant Balance Current 6A
Peak Balance Current 10A
Voltage Variance Between Cells <100mV
Working Efficiency when Balance Current is 1A >94%
Working Temperature -40 – + 80c
Storage Temperature -40 – +100c
Note: Specifications subject to change without notice.

International Patent applies to Active Cell Balancer

Lithium Battery System Wiring Diagrams

Click on the thumbnail below to download the Wiring Diagram PDF file

Enerdrive Lithium Setup – ePOWER Drawing

You will require the Adobe® Reader® software installed on your computer to view these files. You can download the reader by clicking on the link below.

Adobe® Reader® software is the free global standard for reliably viewing, printing, and commenting on PDF documents.

Get Adobe Reader

Shares
Share This